Allied Telesis AT-GS900M Series - Page 517

AT-GS900M Series CLI Reference
Section IV: Security and Traffic Control 517
 To change the supplicant port settings for 802.1x Port-based
authentication on the specified port, see “SET PORTAUTH PORT
(802.1X Supplicant Port)” on page 522.
 To change the authenticator port settings for MAC address-based
and Web-based authentication on the specified port, see “SET
PORTAUTH PORT (Authenticator Port for MAC and Web)” on
page 524.
 To cancel the port as an authenticator and supplicant on the
specified port, see “SET PORTAUTH PORT (Canceling the
Authentication Type)” on page 527.
Confirmation Command
“SHOW PORTAUTH” on page 532
“SHOW VLAN” on page 216
Example
The following command changes the settings for all authentication
methods in the authenticator port type on port 1 to 8:
Manager > set portauth=auto port=1-8 type=authentictor