S820E UG PN: 10580-00343 Rev. H 8-11
Vector Voltmeter 8-4 Relative Measurements
If you are making many measurements, the display format can be set to
Table. Refer to “Table Display Format” on page 8-12.
This completes the procedure for relative measurements.
Note
Clearing the reference while using the Table Display Format will
immediately clear all of the relative measurement values that
have been stored within the table.
Saving a new reference value while using the Table Display
Format will immediately recalculate and display all of the relative
measurement values with respect to the new saved reference.
You can change the current reference without pressing the Clear
Reference submenu key. When the current measurement is
desired as the new reference, press the Save Reference
submenu key.
To Next Page
Loading...
