2-8 PN: 10580-00343 Rev. H S820E UG
2-4 Front Panel Overview Instrument Overview
Esc Key
Press this key to cancel any setting that is currently being made or to close
the currently dialog box.
Enter Key
Press this key to finalize data input or select a highlighted item from a list.
Shift Key
During file management functions the shift button toggles the on-screen
keyboard between upper case and lower case characters. It may also be used
for saving screen shots. To save a screen shot, press and hold the Shift while
then pressing (one at a time) the period (.) key, then the +/– key. Refer also to
Section 11-6 “Screen Shot Capture” on page 11-12.
Arrow Keys
The four arrow keys (around the Enter key) are used to scroll up, down, left,
or right. The Up/Down arrow keys can often be used to change a value or to
change a selection from a list. This function is similar to the function of the
rotary knob. The Left/Right arrow keys can be used to move markers and the
Up/Down arrow keys can also be used to move limit lines.
In Video Inspection Probe (VIP) mode, use the arrow keys to pan a captured
image. Refer to Chapter 15.
Number Keypad
The Number keypad has two functions: The primary function is number
entry. The secondary function of the number keypad is to list various menus.
See “Keypad Menu Keys (1 to 9)” below.
Rotary Knob
Turning the rotary knob changes numerical values, scrolls through selectable
items from a list, and moves markers or limit lines. In VIP mode, use the
rotary knob to zoom in and out on a captured image.
To Next Page
Loading...
