Safety-2 PN: 10580-00343 Rev. H S820E UG
Safety Symbols Used on Equipment and in Manuals
The following safety symbols are used inside or on the equipment near
operation locations to provide information about safety items and operation
precautions. Ensure that you clearly understand the meanings of the symbols
and take the necessary precautions before operating the equipment. Some or
all of the following five symbols may or may not be used on all Anritsu
equipment. In addition, there may be other labels attached to products that
are not shown in the diagrams in this manual.
This indicates a prohibited operation. The prohibited
operation is indicated symbolically in or near the barred
circle.
This indicates a compulsory safety precaution. The required
operation is indicated symbolically in or near the circle.
This indicates a warning or caution. The contents are
indicated symbolically in or near the triangle.
This indicates a note. The contents are described in the
box.
These indicate that the marked part should be recycled.
To Next Page
Loading...
