S820E UG PN: 10580-00343 Rev. H Safety-3
For Safety
Warning
Always refer to the operation manual when working
near locations at which the alert mark, shown on the
left, is attached. If the operation, etc., is performed
without heeding the advice in the operation manual,
there is a risk of personal injury. In addition, the
equipment performance may be reduced. Moreover,
this alert mark is sometimes used with other marks
and descriptions indicating other dangers.
Warning
When supplying power to this equipment, connect
the accessory 3-pin power cord to a 3-pin grounded
power outlet. If power is supplied without grounding
the equipment, there is a risk of receiving a severe
or fatal electric shock.
Warning
This equipment can not be repaired by the operator.
Do not attempt to remove the equipment covers or to
disassemble internal components. Only qualified
service technicians with a knowledge of electrical
fire and shock hazards should service this
equipment. There are high-voltage parts in this
equipment presenting a risk of severe injury or fatal
electric shock to untrained personnel. In addition,
there is a risk of damage to precision components.
To Next Page
Loading...
