Two default, factory-provided, results groups are provided that store sample data
les by plate name:
•
Figure 14 shows the factory-provided PN_Injfolder_RG results group and the
folders created when it is used. This results group creates a folder for each
injection.
• Figure 15 shows the factory-provided PN_RG results group and the folders
created when it is used. This results group does not create a folder for each
injection. All samples for a plate are stored in the same folder. If you include two
plates in a run, a separate folder is created for each plate.
Figure 14 PN_Injf
older_RG results group
Figure 15 PN_RG r
esults group
Results group
example 1: store
files by plate
name
Chapter 7 Manage libr
ary resources
Results Group library
7
3500/3500xL Genetic Analyzer User Guide—Data Collection Software v3.1
157
To Next Page
Loading...