Applied Biosystems 3500 - Check sequence or sample quality and re-inject samples

Check sequence or sample quality and re-inject samples
When an injection is complete, it is agged with in the Injection and Analysis
columns. If the softw
are detects a problem with oscale data or low quality samples,
the injection is also agged with
.
Note: If the Injection, Analysis, or Flag columns are not display
ed, you can click the
Table Seings buon, then show them in the injection list.
1.
Expand the Flag pane at the boom right of the screen.
Check sequence
or sampl
e quality
Chapter 3 Set up and run
Check sequence or sample quality and re-inject samples
3
3500/3500xL Genetic Analyzer User Guide—Data Collection Software v3.1
67