Applied Biosystems 3500 - Create a New Sizecalling Protocol

1.
Access the Sizecalling Protocols library.
2.
Click Create.
3.
In the Analysis Seings tab of the Create New Sizecalling Protocol dialog box
(Figure 25), specify seings (see “Sizecalling protocol—Analysis seings“ on
page 181).
4.
Click QC Seings. In the QC Seings tab of the Create New Sizecalling Protocol
dialog box (Figure 26), specify seings (“Sizecalling protocol—QC seings“ on
page 184).
Cr
eate a new
sizecalling
protocol
Chapter 7 Manage libr
ary resources
Sizecalling protocols library (primary analysis—fragment)
7
3500/3500xL Genetic Analyzer User Guide—Data Collection Software v3.1
179