8.
For sequencing assays, specify Amplicon and Specimen.
9.
Repeat steps step 6 through step 8 to assign the Sample T
ype for all named wells.
10.
Go to “Assign assay, le name convention, and results group in the plate
view“ on page 49.
Note: If a le name convention or results group you created is not listed for the plate,
go to “Add assays, le name conventions, and results groups to a plate“ on page 77.
1.
Select the wells for which to specify an assay.
2.
Select the checkbox next to the assay name to assign the assay to the selected
wells.
3.
Repeat for le name conv
entions and results group.
4.
Select Save Plate.
5.
Go to “Print the plate lay
out“ on page 50.
Assign assay, fil
e
name convention,
and results group
in the plate view
Chapter 3 Set up and run
Assign plate contents
3
3500/3500xL Genetic Analyzer User Guide—Data Collection Software v3.1
49
To Next Page
Loading...
Need help?
General
