Applied Biosystems 3500 - Start the Run from Preview Run

4.
To modify the injection list at any time before a run or during a run, select an
injection, then click Move Up, Move Down, and Delete as needed.
5.
T
o specify a duplicate injection (a replicate injection that uses the same
instrument protocol as the original injection), select an injection, then click
.
Sample data les for each duplicate injection can be sav
ed in a separate folder in
the results group folder if specied in the results group.
Start the run from Preview Run
When the injection list is congured, click Start Run. The Monitor Run screen is
automatically displayed.
IMPORTANT! You must re-inject samples before the run completes unless the Pause
after last injection preference is set.
Note: If an install check for the run application type (Sequencing or Fragment) has
not been performed, a message is display
ed and the run does not start.
Chapter 3 Set up and run
Start the run from Preview Run
3
64
3500/3500xL Genetic Analyzer User Guide—Data Collection Software v3.1