Using the AX3000
96 AX3000 Models 90 - User's Manual
Table 3 - Axel Notification Icons ('Classical' taskbar)
Coming back the Local Desktop
Turning off - See Chapter 4.5
Getting thin client information (Firmware/Hardware)
The network status is shown by one of the following icons:
- : Wireless interface available
- : Wireless interface not connected
- : Ethernet cable available
- : Ethernet cable not connected
Disconnecting the current session. See Chapter 4.2.5.
USB drive status. Only displayed if a USB drive is attached
- : read in progress
- : write in progress
Set Portrait/Landscape mode - See Appendix A.7.2
Dual Monitor (see Appendix A.6): connection to slave is established
In event of problem:
4.3 - CONNECTING A SESSION
4.3.1 - Creating a Session
Opening a session can be done through:
- The keyboard: press <Alt><Fx> for a predefined session (see Chapter
3.2.3) or Ctrl><Alt><O> for the application desktop.
- The mouse: click onto the session icon or the session label in the
taskbar.
Note: if the session is 'host free', a dialog box is displayed. The following
parameters are required:
- Connection Type: read only information.
- Host: select if from a list or enter its DNS name or its IP address
- TCP Port: the default value is protocol dependent
To Next Page
Loading...
Need help?
General
