Appendix
AX3000 Models 90 - User's Manual 261
A.3.4 - Errors
a) Boot Time Failure
The AX3000 automatically searches for a DHCP server on booting. If after 30
seconds no DHCP (or BOOTP) server answers the following dialog box is
displayed:
At this stage two options are available:
- <F11>: rebooting the AX3000 to run the DHCP search again.
- <Ctrl><Alt><Esc>: entering the set-up to modify AX3000 settings.
b) Re-negotiation Failure
The lease time must be regularly re-negotiated (except if the IP address has
been offered by a BOOTP server).
If a re-negotiation fails the following dialog box is displayed:
This indicates that in two minutes the AX3000 will be no longer be permitted to
use the leased IP address and the session will be terminated