Installing under UNIX/LINUX
212 AX3000 Models 90 - User's Manual
Enter the AX3000 set-up and set for the required session the 'Enhanced Mode'
parameter to 'Yes'. See Chapter 8.1.5.
8.1.8 - Connection Properties
The following box is displayed:
These parameters are:
- TERM Value (telnet and ssh2 protocols). The default TERM value
depends on the selected emulation.
- Auto-Connection: if this parameter is set to 'yes', the connection will be
automatically established when the AX3000 is powered. Otherwise, the
user can press <Alt><Fx> to establish the connection.
- Auto-Reconnection: if this parameter is set to 'yes', a new connection is
automatically established after a disconnection. Otherwise, the user can
press <Alt><Fx> to establish a new connection.
- Session Label: this character string (11 characters max.) is used to
identify the session within the local desktop or in the taskbar.
- Login Script: a "login script" can be set to automatically enter user
names and passwords at the login prompt. See Chapter 8.1.9.
- Enhanced parameters: see Appendix A.7.3.
8.1.9 - Login Script
The "login script" can be set to automatically enter user names and passwords
at the login prompt.
To Next Page
Loading...
Need help?
General
