Interactive Set-Up
36 AX3000 Models 90 - User's Manual
The "Link" parameter is set by default as auto-sense. Available modes are:
- Auto-sense,
- 10BT HalfDuplex,
- 10BT FullDuplex,
- 100BT HalfDuplex,
- 100BT FullDuplex.
The next sub-chapters deal with:
- The interface setting (static or dynamic IP address)
- The DNS protocol.
- The router management,
a) Static or Dynamic IP Address
The DHCP protocol allows the thin client’s IP address (and other parameters) to
be obtained at the boot time.
When "Enable DHCP" is set to "Yes", the IP Address' field is not available and
the DHCP settings are set through the "DHCP Parameters" option. Press
<Space> to display the dialog box:
The "DHCP Option List" allows certain parameters to be automatically assigned
by DHCP.