Installing under UNIX/LINUX
200 AX3000 Models 90 - User's Manual
This chapter covers AX3000 installation under Unix/Linux.
8.1 - TEXT MODE SESSION (TCP/IP OR SERIAL MODE)
8.1.1 - Setting a Session Profile
To set the profile of a session, enter the AX3000 Set-Up and select the
[Configuration]-[Sessions]-[Session X] menu (where X is the session number
to be configured). The following box is displayed:
These parameters are:
- Session Type: select 'Text Emulations'.
- Emulation: see Chapter 8.1.3
- Protocol: select 'telnet', 'tty', 'ssh2' or 'serial'. (See Chapter 8.1.2)
To Next Page
Loading...
Need help?
General
