Axel AX3000 - D) Remapping a COM;LPT Port

Installing under Windows
140 AX3000 Models 90 - User's Manual
- Auto-Connection: when set to yes, the option allows the ICA session to
be automatically established when a smartcard is inserted in the reader.
- Redirected COM/LPT Port: COM port(s) are selected through a list. This
list is composed by the following items:
- All
- None
- xxx (port): these are the COM port name(s). This allows the
selection of only one COM port to be redirected.
- USB Ports (XenDesktop): set (or not) the USB Port Redirection for
XenDeskop (not supported by XenApp). For more information about
'Eligible Devices' see Chapter 3.2.5.
- Include Audio Processing (Lan): not applicable for Citrix.
d) Remapping a COM/LPT port
Thin Client COM ports must be remapped to server COM ports. The remapping
commands are "change client" or "net use". These commands may be issued
from a command prompt from the thin client’s Citrix session.
Example: the Windows COM4 port is remapped to the thin client COM1 port
net use com4: \\client\com1:
or
change client com4: com1:
Note: this remapped resource is only for the thin client. In this example COM4 is
not seen by other users.
: How to set-up a user account to automatically launch a "net use" command.
- Create a shareable directory called Netlogon.
- In this directory create a file called "myscript.bat".
- Enter the 'net use' command line as required in this file.
- Edit the user account properties by selecting the 'profile' tab and set the
"Logon script" to read the "myscript.bat" file.
For more details see Windows help on Netlogon.