Installing under UNIX/LINUX
AX3000 Models 90 - User's Manual 203
Note: the Axel SSH client is compliant with OpenSSH
d) Serial Ports (USB adaptors)
The Axel thin client supports both TCP/IP and serial (RS232) connections.
To establish a serial connection, the session 'Protocol' must be set to 'serial'.
Then set 'Main Serial Port' to a native serial ports or an USB serial port.
The selected auxiliary port is set-up through the [Configuration]-[Ports]-[USB
Logical Ports]-[yyy] menu (see Chapter 3.5.1).
8.1.3 - Selecting the Emulation
The available emulations are:
Note: selecting emulation sets the value of the TERM environment variable (see
Chapter 8.1.8). This value can be modified later if necessary.
To Next Page
Loading...
Need help?
General
