Axel AX3000 - Connecting a USB Audio Device; Listing Connected USB Devices

Interactive Set-Up
AX3000 Models 90 - User's Manual 79
- Vendor Name: character string sent back by the thin client when a
SCardGetAttrib (option SCARD_ATTR_VENDOR_NAME) command is
issued by a Windows PC/SC application.
- IFD Type: character string sent back by the thin client when a
SCardGetAttrib (option SCARD_ATTR_VENDOR_IDF_TYPE) command
is issued by a Windows PC/SC application.
- Smartcard Reader Registration: generally a reader must be attached to
the thin client to be enumerated by a PC/SC application
(SCardListReaders command). Some readers have to be listed even
when they are not attached (for example a token - reader and smartcard
are integrated in a memory stick). This parameter allows the method to
be selected: dynamic or persistent.
The [Delete] allows this store entry to be deleted.
The use of a smartcard reader is enabled/disabled per session. See Chapters
5.1.6 and 5.2.8.
3.4.11 - Connecting a USB Audio Device
The USB audio device is automatically detected by the Axel thin client.
The use of an audio device is enabled/disabled per session. See Chapters 5.1.6
and 5.2.8.
3.4.12 - Listing Connected USB Devices
To list all connected USB devices (supported or not) select the menu
[Diagnostics]-[USB]. For more information see Chapter 9.6.