Axel AX3000 User Manual

Installing under OS/400
178 AX3000 Models 90 - User's Manual
- WSCST library (WSCSTLIB): associated library.
Note: if the auxiliary port used for printing is a serial port, set the 'Printer'
operating mode and set the associated parameters (baud rate, handshake, etc).
b) Enhanced Parameters
The following dialog box is displayed:
These parameters are:
- TCP Port: OS/400 telnet port. Generally 23.
- TERM Value: do not change.
- Auto-Connection: if this parameter is set to 'yes', the connection will be
automatically established when the AX3000 is powered. Otherwise, the
user can press <Alt><Fx> to establish the connection.
- Auto-Reconnection: if this parameter is set to 'yes', a new connection is
automatically established after a disconnection. Otherwise, the user can
press <Alt><Fx> to establish a new connection.
- Enhanced Parameters: see Appendix A.7.3.
- Transparent Mode: this mode allows ASCII data to be sent to printer
session port. The possible values are:
- No
- Yes: data can be encoded in decimal and hexadecimal notations
- Yes, hexa: data is encoded only in hexadecimal notation.
- On/Off ASCII Sequence: start and stop transparent mode sequence. For
more information see Chapter 6.2.5.

Axel AX3000 Specifications

General

Brand	Axel
Model	AX3000
Category	Server
Language	English