Tools and Statistics
238 AX3000 Models 90 - User's Manual
b) DHCP/DNS
The DHCP/DNS box is the following:
In the above dialog box, the following information is given:
- State: the current DHCP state. The possible states are:
- selecting: searching a DHCP server (broadcast)
- requesting: requesting an IP address from the DHCP server which
answered 'selecting'
- bound: search has been successfully completed (IP address has
been set)
- free: DHCP protocol is not enabled or DHCP protocol failed
- renewing: renewing the leased IP address to the DHCP server
which answered 'selecting'
- rebinding: renewing the leased IP address to any DHCP server
(broadcast)
- DHCP Server: IP address of the DHCP server.
- Lease Time (seconds): amount of time of the leased IP address. For
BOOTP protocol, the value is 'infinity'.
- Remaining Lease: remaining time before lease expires. For BOOTP
protocol, the value is 'infinity'.
- Update Type: information about the DNS server update when updated by
the thin client. Main values are:
- None: no update
- Direct / Reverse: both types are done by the thin client.
- Direct / Reverse (by DHCP): direct update done by the thin client
and reverse update done by the DHCP server
To Next Page
Loading...
Need help?
General
