Interactive Set-Up
66 AX3000 Models 90 - User's Manual
Three operations are permitted:
- Enter the password to access the set-up
- Press <Esc> or select the [Cancel] button to exit set-up mode
- Select the [Consult] button to access the set-up without using the
password. All set-up operations will be permitted but it will not be
possible to save the modifications.
The Consultation mode is not offered if the "Administrator Hot Key
disabled" option is set to "No". (See Appendix A.7.2)
IMPORTANT: if the password is not known, the super password 'yaka' can be
used. (Only from the local interactive set-up and only if "Administrator Hot Key
disabled" is set to "No". See Appendix A.7.2)
3.2.9 - Miscellaneous
Select the [Configuration]-[Terminal]-[Miscellaneous] menu:
a) Default Printer Port
The default port is used for screen dumps or to select the default port for
printing via escape sequences (for text-mode emulations).
Printer parameters:
- Default port: select the port from a list.
- Pre-hardcopy String (available if "default port" isn't "none"): character
string sent before a hardcopy.
- Post-hardcopy String (available if "default port" isn't "none"): character
string sent after a hardcopy (for example "\0C" is a form feed)
To Next Page
Loading...
Need help?
General
