Installing under Windows
AX3000 Models 90 - User's Manual 147
5.3.3 - 'Session Parameters' Section
This is a part of the dialog box:
These parameters are:
- Number of Sessions: this sets the number of sessions reserved for
published applications.
- Dual Monitor: set yes/no.
The following parameters are used dynamically by RDP/ICA to set up
the published applications.
- Additional Parameters: see Chapter 5.1.5 for RDP and 5.2.7 for ICA.
- Redirected Resources: see Chapter 5.1.6 for RDP and 5.2.8 for ICA..
- Performances or Bandwidth: see Chapter 5.1.7 for RDP and 5.2.9 for
ICA.
Notes:
- After changing setup parameters it is necessary to reboot the thin client to
ensure the new values are used.
- Once "Application Desktop" is setup the reserved sessions are
inaccessible from the setup menus.
- The setting up of an "Application Desktop" activates the taskbar allowing
sessions to be changed with the mouse.
5.4 - VMWARE VIEW CLIENT SESSION
A VMware View Client session lets the thin client to be connected VMware
Desktop Virtualization environments.
To Next Page
Loading...
Need help?
General
