Interactive Set-Up
76 AX3000 Models 90 - User's Manual
3.4.8 - Connecting a Touch Screen
A USB touch screen may be seen by the thin client:
- Either as a multi-touch device
- Or as a pointer device
- Or as an USB-RS232 adaptor. In this case a logical USB port is
automatically created (see Chapter 3.4.7).
In both cases, to set-up the touch screen, select the menu [Configuration]-
[Terminal]-[Screen]. For more information see Chapter 3.2.2.
3.4.9 - Connecting a Mass Storage Device
Most USB mass storage devices fall in one of the categories below:
- memory sticks,
- hard drives,
- CD/DVD readers,
- floppy disks,
- memory card readers,
- digital cameras.
The main difference between these devices is the type of file system (i.e the
format in which the data is stored).
IMPORTANT: only mass storage devices formatted in FAT12, FAT16, FAT32
and ISO9660 are supported.
To Next Page
Loading...
Need help?
General
