Installing under OS/400
162 AX3000 Models 90 - User's Manual
- Terminal Name (DEVNAME): if this name is left blank, the OS/400 will
associate a dynamic name to this session (i.e.: QPADEV001).
- Display Parameters: for more information, see the next chapter.
- Additional Parameters: lets certain emulation parameters to be
changed. See Chapter 6.1.5.
- Key Mapping: lets any keys to be remapped. See Chapter 6.1.5.
- Palette: lets emulation colors to be remapped. See Chapter 6.1.5
6.1.3 - Display Parameters
The following box is displayed:
These parameters are:
- Resolution: For information only. This is the current resolution selected
in the [Configuration]-[Terminal]-[Screen] menu.
- Full Screen: two possible values:
- 'Yes': the session is displayed on the entire screen and the character
size is automatically adapted to the resolution and the number of
lines/columns.
- 'No': the session is displayed in a 'Window' mode and the character
size can be customized.
- Character Size (Only when 'Full Screen' is disabled): Two possible
values: 'standard' (8x16) or 'double' (16x32).
Note: for more information, please refer to Appendix A.7.5.
6.1.4 - Customizing 5250 Emulation
Various 5250 emulation parameters can be modified but generally the default
values are the most suitable.
To customize the 5250 emulation, enter the AX3000 Set-Up and select the
To Next Page
Loading...
Need help?
General
