Interactive Set-Up
74 AX3000 Models 90 - User's Manual
This association is maintained even if the printer is powered off, disconnected or
connected to the other USB port.
Releasing a logical port is a manual operation (see Chapter below 'Releasing a
Logical Port').
b) Setting-Up
The USB printer set-up procedure is the same as a serial or parallel printer.
For more information, see Chapter 3.5.2 and the following.
c) Releasing a Logical Port
A logical port must be manually released. This operation can be performed only
when the USB device is no longer connected.
In the menu [Configuration]-[Ports]-[USB Logical Ports] select the logical
port. The following box is displayed:
Select the [Delete] button to release the logical port.
The released logical port is removed from the list of the associated ports and is
now available for the next USB device.
To Next Page
Loading...
Need help?
General
