Appendix
280 AX3000 Models 90 - User's Manual
i) 'Break Code' Parameter
For the telnet session, the <Ctrl><Alt><Pause> hotkey sends a 'break' code to
the host. This break code is defined by the RFC 854, this is 'IAC BREAK'.
If needed, this break code value can be modified. The extra values are:
- AO (Abort Output),
- IP (Interrupt process),
-
None (<Ctrl><Alt><Paus
e> generates no c
ode).
j) 'Enabling NAWS' Parameter
The NAWS function (Negotiate About Window Size - RFC 1073) is an optional
feature negotiated when the telnet session established. It allows the thin client
screen format (line x row) to be indicated to the server (when the session is
established or at any time when the screen format is modified).
This parameter allows this function to be disabled: some telnet servers don't
correctly support the NAWS function.
k) 'Always add NULL after CR' Parameter
This option allows being compliant with different telnet server implementation
(about ASCII mode).
l) 'National Language Negotiation' Parameter
This option is only available with 5250 emulation. It allows some environment
variables (KBDTYPE, CODEPAGE and CHARSET) to be set.
A.7.4 - Keyboard Codes and Time Zone Names for RDP/ICA Sessions
a) Keyboard Codes
For RDP/ICA sessions a Microsoft keyboard code can be specified. (See
Chapter 3.2.5) This code allows a keyboard nationality to be negotiated with the
TSE server.
The following table lists the available keyboard codes:
To Next Page
Loading...
Need help?
General
