Installing under Windows
AX3000 Models 90 - User's Manual 113
certificate. See Chapter 3.6.4.
5.1.2 - Connection Properties
The following box is displayed:
These parameters are:
- Auto-Connection: if this parameter is set to 'yes', the connection will be
automatically established when the AX3000 is powered. Otherwise, the
user can press <Alt><Fx> to establish the connection.
- Auto-Reconnection: if this parameter is set to 'yes', a new connection is
automatically established after a disconnection. Otherwise, the user can
press <Alt><Fx> to establish a new connection.
- Session Label: this character string (11 characters max.) is used to
identify the session within the local desktop or in the taskbar.
- Enhanced parameters: see Appendix A.7.3.