Installing under UNIX/LINUX
226 AX3000 Models 90 - User's Manual
8.4.5 - Uninstalling
Remove the AXEL files and kill the AXEL tty server process (signal TERM):
# kill -TERM pid<CR>
where pid is the process ID of the AXEL tty server.
8.4.6 - In Event of Problems...
In event of difficulties please consult the logfile (/tmp/axttylog) and to read the
last messages.
a) Message "Can not bind TCP port"
The message indicates the axtty TCP port (2048 by default) is currently in use.
This port must be released.
b) Message "Waiting for connections from TCP/IP socket"
Initialization is correct and completed. The Axel tty server is now waiting for
incoming connections. Check thin client settings (specially the tty auto-
connection parameter). Possibly a firewall is blocking communication from the
thin client to the server.
8.5 - REMOTE ADMINISTRATION
8.5.1 - AxRM Software
Axel’s Windows administration utility (AxRM or Axel Remote Management) is
available free on the Axel Web site. See Chapter 10.1.
8.5.2 - Using Unix/Linux Commands
The rsh command can be used to run remote commands (get set-up, reboot…)
onto the thin client. Available administration commands are described in
Appendix A.6.