Initial Power-On
14 AX3000 Models 90 - User's Manual
Note: the following keystrokes are available in the set-up (for more information
see Appendix A.1):
- <Enter>: if the current field is a button perform a click. Else jump to the
'default' button of the box ([OK], [Next]…)
- <Spacebar>: click button, toggle yes/no and open a list
- <Esc>: cancel current field or select [Cancel] button
- <Tab> or <>: next field
- <Shift><Tab> or <>: previous field
2.1.1 - First Screen
This first screen allows the session type to be selected:
These parameters are:
- Keyboard: keyboard nationality. The value selected is used from there
on.
- Terminal Name: See appendix A.4.3
- Remote control Allowed: allows thin client to be controlled over the
network. (See Chapter 10.2)
- Resolution: the default value is monitor-dependent (auto-detection of the
recommended resolution). The available resolutions vary depending on
the thin client model. See Chapter 3.2.2.
- Colors: see Chapter 3.2.2.
Note: when exiting the dialog box the graphical settings (resolution and
frequency) may be tested.