Tools and Statistics
232 AX3000 Models 90 - User's Manual
9.2 - UPDATING THE FIRMWARE
The thin client firmware can be updated. This can be done:
- Remotely with the AxRM software. See Chapter 10.
- From a USB memstick.
- With the bootp/tftp protocol.
All Axel products have an ‘FK’ (Firmware key) number. It is important that the
firmware file and Axel hardware have the same FK number. If not the
update will fail.
9.2.1 - From a MemStick
Select the [Upgrade]-[Firmware]-[Update from USB] menu from the AX3000
set-up. The following box is displayed:
When 'Archiving the configuration' option is selected, before the firmware
upgrade, the configuration file will be stored at the memstick root (the filename
is the thin client MAC address).
The firmware filename can be manually entered or located with the [File
Explorer] button.
Click the [Transfer] button to launch the operation.
IMPORTANT: the thin client will automatically reboot after this operation.
The configuration is not sent automatically to the thin client after the firmware
update.
To Next Page
Loading...
Need help?
General
