Interactive Set-Up
58 AX3000 Models 90 - User's Manual
3.2.4 - Audio
Select the [Configuration]-[Terminal]-[Audio] menu:
a) Audio Device
A native audio interface is supported (HD-Audio). But it's also possible to
connect a USB audio device (USB Audio)
This dialog box shows the current audio interface and the following options are
available:
- Hardware Information: miscellaneous information.
- Volume: setting-up the volume (0=mute).
- Sound Alerts: selecting the output device: buzzer or audio device.
b) Sound Alerts
Sound alerts can originate from either the thin client (local) or the server
(remote). Either can be disabled or have its duration set. (Values: no, short, long
or very long.):
- Local: following an unexpected operation the thin client sounds a beep.
- Remote: the beep is requested by the server (escape sequence).
- Sounded for: set if the remote alert is played for "Front session only" or
for "Any session".