Interactive Set-Up
AX3000 Models 90 - User's Manual 49
certificate.
With this setting enabled there are two further optional checks.
- Date Verification (requires an NTP time server to be configured - See
Chapter 3.2.6): A check is made to confirm the connection request is
initiated between the 'Valid After' and 'Valid Before' dates of the server
certificate.
- FQDN Verification: A check is made against the server’s FQDN or IP
address as given in the certificate’s 'Common Name' parameter
The ”Action on Error” option sets the thin client’s behavior when an SSL non-
compliant situation is met (See Chapter 4.3.3).
c) Authentication and Encryption Capabilities
The supported SSL cipher list is displayed below. Select cipher(s) to be
announced during the SSL negotiation.
3.2 - GENERAL SETTINGS
The thin client general settings are available through the [Configuration]-
[Terminal] menu:
To Next Page
Loading...
Need help?
General
