Installing under OS/400
AX3000 Models 90 - User's Manual 177
In the displayed box, set the "Associated Service" to "Prt5250", then select "Net
Service Parameters". The following box is displayed:
These parameters are:
- Server: selected from the server table (see Chapter 3.1.4). A new server
can be added by selecting 'IP address' or 'Server Name'.
- Enhanced Parameters: See next sub-chapter.
- Printer Name (DEVNAME): printer device name.
- Queue for Writer Messages (MSGQNAME): message queue name to
which the printer messages will be sent.
- MSGQNAME Library (MSGQLIB): associate message queue library.
- Font Identifier (FONT): font number (3, 4 or 5 digits).
- Host Print Transform (TRANSFORM): always 'yes'.
- Manufacturer Type and Model (MFRTYPMDL): enter the printer driver
name (ex: *NONE, *HP4, *NECP2...).
- Paper Source 1 (PPRSRC1): selected through list.
- Paper Source 2 (PPRSRC2): selected through list.
- Envelope hopper (ENVELOPE): describes the paper source 3 (selection
through list).
- ASCII 899 support (ASCII899): specifies if the code page ASCII 899 is
supported by the printer.
- WSCST name (WSCSTNAME): qualified name of the customizing object.