Installing under Windows
154 AX3000 Models 90 - User's Manual
printer can be handled with both LPD and RDP redirection protocols.
The main characteristics of these protocols are:
LPD Protocol: (Server level printer)
- The printer must be added to the Windows spooler by the administrator.
- The printer name is static.
- The printer is available when the thin client is powered-on and can be
accessed by any user.
- The printer dataflow is not compressed.
- The display and printer data flows are multiplexed by TCP/IP.
- There is no requirement for any thin client sessions to be connected
- Printer data compression is not possible
RDP/ICA Protocol: (Client level printer)
- The printer is automatically created when the session is established.
- The printer name is static: "terminal name / printer name / session X" (the
session number can varied).
- The printer is only available when the session is established. This printer
is the user default printer. This printer is not "seen" by other users.
- The printer dataflow can be compressed.
- The display and printer data flows are multiplexed by TSE.
The following applies only with LPD printer configuration. For an RDP printer
see Chapter 5.1.6 and for an ICA see Chapter 5.2.8.
To Next Page
Loading...
Need help?
General
