Installing under OS/400
182 AX3000 Models 90 - User's Manual
Note: to check the status of sockets, use the OS/400 netstat command.
By default, the keepalive time out value is very high (sometimes infinite). So this
value must be decreased to allow the OS/400 to check regularly the TCP/IP
connection status. Invoke the following command to change this value (xxx are
seconds):
===> CHGTELNA TIMMRKTIMO(xxx)
This modification will take effect after restarting the telnet server:
===> ENDTCPSVR SERVER(*TELNET)
===> STRTCPSVR SERVER(*TELNET)
IMPORTANT: using a small keepalive value can prevent routers from dropping
the ISDN line and cause high connection bills.
To Next Page
Loading...
Need help?
General
