Installing under UNIX/LINUX
206 AX3000 Models 90 - User's Manual
- Enhanced Mode: enable or disable the display of double-size characters
or color underline attribute.
- Blink Allowed: if blink attribute is disabled, 16 background colors can be
used (instead of the 8 normally available).
- Ignore Blank Atb (WYSE emulation only): if 'yes', the blank attribute is
not processed (example: normal+blank=normal).
- End Sequence: to stop transparent printing mode
- Coding: two keyboard modes are available (ASCII and scancode).
- CAPS Key Mode : set the CAPS LOCK to behave in either of three ways:
- Caps Lock: each alphabetical key sends the corresponding upper
case letter. To unlock this mode press the <CAPS> key.
- Shift Lock: each key send the same character sent by pressing
<Shift><This key>. To unlock this mode press a <Shift> key.
- Uppercase: each key send the upper character if it is present.
Otherwise, this is the lower character (upper-case letter if possible)
which is sent. <Shift> key acts in the standard way (whatever the
CAPS key). To unlock this mode press the <CAPS> key.
- Caps Lock +: same as 'Shift Lock'. But in addition ALL the keys
supported (including <Esc>, function keys...).
- Composed Characters : this parameter (only available in ASCII mode)
sets the keyboard behavior for diacritical characters (for example: ^ + e =
ê):
- No: no specific processing is done
- Local: composite characters are locally processed by the AX3000
- Remote: SCO specific mode (mapchan).
- Euro Coding: this parameter is only available if the current character set
is not PC858 or ISO8859-15 (These 2 character sets include the Euro
symbol). The three values are:
- No: no specific processing is done
- Standard: the Euro symbol replaces the international currency
symbol '¤' within the current character set.
- Custom: any character can be replaced by the Euro symbol within
the current character set (use the decimal notation to enter the
Euro ASCII code).
- <Scroll Lock> & <Pause>: enable or disable these two keys
- Tabulations: a dialog box appears in which tab stops can be set.
- Init String: this character string is sent when the session (telnet or tty) is
established.
- Answer Back: session identifier (10 character max.).