Axel AX3000 - Page 44

Interactive Set-Up
32 AX3000 Models 90 - User's Manual
This chapter describes the thin client installation using the interactive set-up
procedure.
The following can be used to enter the thin client interactive set-up:
- Using <Ctrl><Alt><Esc> from the thin client
- Using Remote Control from AxRM. (See Chapters 10.1 and 10.2)
- Using Telnet from another terminal/PC. (See Chapter 10.3)
Note: the set-up can be password-protected, in which case the password must
be entered to access the quick set-up dialog box. For more information, see
Chapter 3.2.8.
Note: the following keystrokes are available in the set-up (for more information
see Appendix A.1):
- <Enter>: if the current field is a button perform a click. Else jump to the
'default' button of the box ([OK], [Next]…)
- <Spacebar>: click button, toggle yes/no and open a list
- <Esc>: cancel current field or select [Cancel] button
- <F10>: select the 'default' button. Or, if this button is already selected,
perform the associated action.
- <Tab> or <>: next field
- <Shift><Tab> or <>: previous field
- <Ctrl><C>: copy a character string or session settings
- <Ctrl><V>: paste information