1-4 Starling Monitor - User Guide
Electrical Safety
Grounding
Grounding is mandatory for proper and safe operation of the system.
Grounding for the Starling Monitor is provided through the grounding conductor in the
AC power cable.
Electrical Shock Hazard
Do not remove the system covers!
Turn OFF power to the system before performing cleaning procedures.
Dry surfaces thoroughly before reconnecting power to the system.
Note
Should technical assistance be required, contact Baxter Technical Support:
email: starling_rma@baxter.com
Tel (worldwide): +1 360-828-8685
WARNING
Always observe the following safety precautions:
Do not connect the Starling Monitor to a power supply that does not meet the local
electrical standards, or that is not properly grounded.
Use ONLY the AC power cable supplied with the system and, to ensure proper grounding,
connect to a receptacle marked HOSPITAL ONLY or HOSPITAL GRADE.
It is not recommended to use an extension cord to connect the Starling Monitor to a mains
power outlet.
WARNING
To eliminate the risk of electrical shock, operators should always adhere to the
precautions below.
To Next Page
Loading...
