baxter Starling - Chapter 6 - Care and Maintenance; General Care and Maintenance Guidelines

©2020 Baxter International Inc. 6-1
Chapter 6 – Care and Maintenance
General Care and Maintenance Guidelines
Cleaning and disinfecting the Starling Monitor and reusable accessories is recommended after
use and always between patients. Refer to the following procedure instructions, as applicable:
 Cleaning and Disinfecting the Starling Monitor
 Cleaning the LED Display
 Cleaning System Accessories
When performing cleaning procedures, inspect the Monitor surfaces and external cables (AC power
cable, Starling Patient Cable,
etc .) for signs of wear or visible physical damage.
Note It is recommended that users routinely observe the on-screen battery status indicator for
satisfactory operation of the recharging process.
Additional care and maintenance guidelines in this chapter are as follows:
 Storage When Not in Use on page 6-5
 Touch Screen Calibration on page 6-6
 Fuse Replacement Procedure on page 6-10
 Battery Replacement on page 6-12
 Software Upgrade on page 6-12
 Service Information on page 6-13
CAUTION
Do not use any system component or accessory if impaired functionality is suspected.
Contact Baxter Service Center for assistance:
email: starling_rma@baxter.com
Tel (worldwide): +1 360-828-8685