CAPINTEC, INC. CAPTUS
®
3000
• Click in the text box or use the Tab key to move from one text box to another.
To select from drop-down list use or keys.
2. Enter the Patient Information.
• Input the Last Name, First Name, Date of Birth, Patient ID and Physician.
• In the Sex box, select male or female from the drop-down list or press the M or F key.
• In the Select Protocol box, select a pre-defined protocol from the drop-down list for
the Thyroid Uptake procedure.
Note: Any combination of up to 20 alphanumeric characters can be used for the First
Name, Last Name, ID and Physician. Fields not in bold are optional.
Note: If Cap-DICOM software is not installed, the Accession # field will not be
present.
3. Next, input the Dosage Information.
• The isotope associated with the selected protocol will appear at the top of this
section. The fields in this section of the screen will vary according to the Dose
Administration mode selected in the protocol as follows:
Dose Measured is Dose
Administered
(Single Dose)
Measure Each Dose and
Add Activity
(Multiple Doses)
Note: Manually add the activity of all
capsules and enter the total activity in
the “Total Activity” input box. Also,
each capsule must have the same
activity, calibration date and time.
Measure one Capsule and
Multiply by Number
Administered
(Multiple Doses)
November 13 THYROID UPTAKE 7-11
To Next Page
Loading...
Need help?
General
