EasyManua.ls Logo

Capintec CAPTUS 3000 - Page 17

Capintec CAPTUS 3000
338 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CAPINTEC, INC. CAPTUS
®
3000
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVERS
This statement is necessary because of the high voltage present (1000 volts) on the
PC board installed in the computer. A screwdriver is necessary to remove the covers.
REFER SERVICING TO QUALIFIED SERVICE PERSONNELThis statement
informs the user that no servicing of the computer system should be performed by the
user.
ALL POWER CABLES MUST BE CONNECTED THROUGH THE ISOLATION
TRANSFORMERThis statement is necessary to eliminate any shock hazard to the
patient and the user.
Figure 1-3
Located on the top of the Isolation Transformer is a label (Figure 1-4) providing the system
power requirements, the voltage and serial number of the system, the replacement fuse
values for both power line voltages and the fuse replacement warning.
November 13 SAFETY 1-3

Table of Contents

Related product manuals