Capintec CAPTUS 3000 User Manual

CAPINTEC, INC. CAPTUS
®
3000
Figure 12-7
4. To stop the counting, click the
button or press Alt+A. The collected data is
discarded.
5. After the counting is complete, results are shown in the default Data mode. The data
modes are:
• Raw Only – To view raw data only.
• Decay Corr Only – To view decay corrected data only.
• Raw and Decay Corr – To view both (default).
To change the Data mode, click the appropriate radio button in the Data frame.
The data can be displayed as either a graph (default) or as a table.
• Graph – The data counts collected are displayed as a function of real time. The solid
line represents the Raw data and the dashed line represents the Decay Corrected
data.
• Table – Displays the measured counts in all ROIs in a tabular mode.
To change the Display mode, click the appropriate radio button in the Display frame.
The data can also be displayed over various ROIs (ROI 1 (default), 2, 3, 4). To change
the ROI, click the appropriate radio button in the ROI frame.
6. To print the results, click the
button or press Alt+P. Raw and decay corrected
data for all ROIs is printed in the table format along with graphs for each ROI.
7. To exit the Time Activity Analysis module and return to the CAPTUS
®
3000 Main screen,
click the
button or press Alt+E.
12-6 TIME ACTIVITY ANALYSIS November 13

Capintec CAPTUS 3000 Specifications

General

Brand	Capintec
Model	CAPTUS 3000
Category	Medical Equipment
Language	English