ComAp InteliDrive DCU Marine - Basic Settings; Engine Name; Mode ID

InteliDrive DCU Marine - 3.0.0 Global Guide
111
Basic settings
Setpoint group Basic settings Related FW 3.0.0
Range [units] [-]
Default value ID
Step [-]
Comm object 8637 Related applications All
Config level Standard
Setpoint visibility Always
Description
User defined name, used for InteliDrive controller identification with remote connection.
Engine name is max 14 characters long and have to be entered manually using InteliMonitor software.
Note: Engine name is not changed when new archive is loaded. Check Engine name after firmware
upgrade.
Engine Name
6 back to List of setpoints
Setpoint group Basic settings Related FW 3.0.0
Range [units] [-]
Default value OFF
Step [-]
Comm object 8315 Related applications All
Config level Standard
Setpoint visibility Always
Description
Mode ID [OFF, AUX ]
Mode ID [OFF, EME ]
Mode ID [OFF, EME, HRB ]
Mode ID [OFF, PRP ]
Equivalent to Controller mode changes by Mode→ or ←Mode buttons.
Mode ID
6 back to List of setpoints