ComAp InteliDrive DCU Marine - Engine Params; Starting RPM

InteliDrive DCU Marine - 3.0.0 Global Guide
123
Engine params
Setpoint group Engine params Related FW 3.0.0
Range [units] 30 .. 1500 [RPM]
Default value 350
Step 1
Comm object 9095 Related applications All
Config level Standard
Setpoint visibility Always
Description
“Firing” speed when controller stops cranking = one of the engine running indications.
Note: Under speed limit is fix 30 RPM.
Starting RPM
6 back to List of setpoints