InteliDrive DCU Marine - 3.0.0 Global Guide
167
Setpoint group Act. Calls/SMS Related FW 3.0.0
Range [units] 1 .. 250 [-]
Default value 3
Step 1
Comm object 24505 Related applications All
Config level Standard
Setpoint visibility Always
Description
Setpoint specifies number of attempts to open Active call connection when phone line is engaged.
Note: Timeout for connection is 90 sec and after 120 sec controller starts the next attempt. Incoming
calls are blocked when controller is trying to send active call message.
A.C.Multiplier
6 back to List of setpoints
To Next Page
Loading...
