ComAp InteliDrive DCU Marine User Manual

InteliDrive DCU Marine - 3.0.0 Global Guide
277
Value group Info Related FW 3.0.0
Resolution [units] [-]
Comm object 8480 Related applications All
Description
Type of application/configuration used with controller.
Application
6 back to List of values
Value group Info Related FW 3.0.0
Resolution [units] 1 [-]
Comm object 8707 Related applications
Description
Firmware branch code. Contains 1 in case of standard branches.
SW Branch
6 back to List of values
Value group Info Related FW 3.0.0
Resolution [units] 1 [-]
Comm object 9887 Related applications
Description
This value contains actual controller mode. The controller mode is selected by the setpoint Basic Settings:
Mode ID but the setpoint can be overridden by Logical Binary input Remote OFF.
Mode ID
6 back to List of values
Value group Info Related FW 3.0.0
Resolution [units] 1 [-]
Comm object 10040 Related applications
Description
Code of the currently running system process timer. The text representation of each code can be obtained by
the procedure described at the value Engine state.
Timer Text
6 back to List of values
Value group Info Related FW 3.0.0
Resolution [units] 1 [s]
Comm object 8955 Related applications
Description
The value contains remaining time of the currently running system process timer.
Timer Val
6 back to List of values

ComAp InteliDrive DCU Marine Specifications

General

Brand	ComAp
Model	InteliDrive DCU Marine
Category	Controller
Language	English