ComAp InteliDrive DCU Marine - Local Speed

InteliDrive DCU Marine - 3.0.0 Global Guide
133
Setpoint group Engine params Related FW 3.0.0
Range [units] 0,0 .. 100,0 [%]
Default value 0,0
Step 0,1
Comm object 9948 Related applications All
Config level Standard
Setpoint visibility Always
Description
Setpoint specifies Engine Values: Speed Request when Engine params: EnLocalSpeed =
ENABLED. Setpoint can be changed as standard setpoint or by Fast edit function: press Enter for 4 sec,
/ ¯ set value, press Enter to confirm. see
Speed Request (page 266) charts for PRP and AUX / EME / HRB modes.
Local Speed
6 back to List of setpoints