ComAp InteliDrive DCU Marine - LCD Brightness; Engine Speed; Oil Press; Coolant Temp;Coolant Press (PRP Only)

InteliDrive DCU Marine - 3.0.0 Global Guide
244
Related FW 3.0.0 Related applications All
Comm object 7
Description
Analog input for external LCD brightness setting (e.g. via potentiometer). Keyboard LCD brightness setting
does not work when input is configured. Expected value is in the range 0 to 100%.
LCD Brightness
6 back to List of LAI
Related FW 3.0.0 Related applications All
Comm object 8
Description
RPM value from ECU - J1939.
Engine Speed
6 back to List of LAI
Related FW 3.0.0 Related applications All
Comm object 9
Description
Engine oil pressure, which is displayed at the first controller screen.
Note: Configure Oil Press logical analog input (LAI card in DriveConfig) to display the value at the first
controller screen.
Oil Press
6 back to List of LAI
Related FW 3.0.0 Related applications All
Comm object 67
Description
Engine coolant temperature, which is displayed at the first controller screen.
Note: Configure Coolant Temp logical analog input (LAI card in DriveConfig) to display the value at the
first controller screen.
Coolant Temp
6 back to List of LAI
Related FW 3.0.0 Related applications PRP
Comm object 66
Description
Running indication and speed dependable protection in PRP.
Coolant Press (PRP only)
6 back to List of LAI