ComAp InteliDrive DCU Marine - Prelubrication; Prestart; Ready to Start;Ready to Load; Redstoplamp

InteliDrive DCU Marine - 3.0.0 Global Guide
204
Related FW 3.0.0 Related applications All
Comm object 49
Description
Periodic prelubrication function – see Engine params: PrelubrTime (page 128) and PrelubrPause (page
128).
Prelubrication
6 back to List of LBO
Related FW 3.0.0 Related applications All
Comm object 36
Description
Periodic prelubrication function – see Engine params: PrelubrTime (page 128) and PrelubrPause (page
128).
Prestart
6 back to List of LBO
Related FW 3.0.0 Related applications All
Comm object 262
Description
Engine ready for start indication: no start blocking alarm is active. Output is active in LOC (Local) mode as
well (even if can’t be started by binary inputs).
Ready To Start
6 back to List of LBO
Related FW 3.0.0 Related applications All
Comm object 67
Description
Output closes if the engine is in Running state and can be loaded. Opens in Cooling state. Active only if
RPM > MinLoadSpeed.
Ready To Load
6 back to List of LBO
Related FW 3.0.0 Related applications All
Comm object 1829
Description
Active when continued operation could result in damage to exhaust system, but actual reason of the alarm
may not be exhasut system related.
RedStopLamp
6 back to List of LBO