ComAp InteliDrive DCU Marine - ID-COM Terminals

InteliDrive DCU Marine - 3.0.0 Global Guide
40
Note: ID-DCU MARINE box is fixed using four screw clips.
Note: Maximal torque to tight main screw is 0.25 Nm.
4.1.5 ID-COM terminals
Communication interface ID-COM is mounted directly to ID-DCU MARINE box.
The new standard ID-COM will only be with the RS485 interface.
Note: Maximal torque to tight main screw is 0.25 Nm.
CAN1 Extension modules: EMS, IS-AIN8(TC), IS-BIN16/8, IGS-PTM, IGL-RA15
CAN2 Intercontroller: I-LB+, IG-IB, IB-NT, others ID-DCU MARINE